est ce que qqun sait si le at at mr est fixe ou bien articule
il me semble avoir lu qque part qu'il etait seulemnt fixe mais suis pas tres sur
Sur les photos il semble fixe mais bon
at at
Modérateur : Staff MIB
-
colpar
- POTF2 Green Card
- Messages : 3483
- Inscription : 27 nov. 2003 20:18
- Contact :
Je crois qu'il est totallement fixe ( avec panneaux amovibles si je me souviens bien ) ... mais je dois avouer qu'à 1200 € le bébé, je tenterais pas de le faire marcher même s'il pouvaittitoun a écrit :
est ce que qqun sait si le at at mr est fixe ou bien articule
il me semble avoir lu qque part qu'il etait seulemnt fixe mais suis pas tres sur
Sur les photos il semble fixe mais bon
-
Solo..., Han Solo
- Staff MIB - Admin
- Messages : 19458
- Inscription : 17 oct. 2003 11:05
- Localisation : Belgique
- Contact :
Yep exactement fixe ou pas, il restera sous acrylic case, je vais pas tenter de le faire marcher (si il est mien un jour…)
Pour les panneaux là j'en suis pas sur… Le futur Code3 aura des panneaux amovibles mais le MR j'en suis pas sur du tout… à vérifier donc.
Quelle bête cet AT-AT…
Han
Pour les panneaux là j'en suis pas sur… Le futur Code3 aura des panneaux amovibles mais le MR j'en suis pas sur du tout… à vérifier donc.
Quelle bête cet AT-AT…
Han
c'est du flan…
-
titoun
- SAGA
- Messages : 664
- Inscription : 26 juil. 2004 19:29
a ce prix là ils auraient pu le faire articule !
que faire attendre le code3 (suis un peu deçu par x wing et millenium) ou bien trouver un paiement en dix fois pr le mr
code3 eux ft le paiement en cinq fois ss frais (tres pratique) on se laisse vite tenter!!!!
que faire attendre le code3 (suis un peu deçu par x wing et millenium) ou bien trouver un paiement en dix fois pr le mr
code3 eux ft le paiement en cinq fois ss frais (tres pratique) on se laisse vite tenter!!!!
-
Jempa
- POTF2 Green Card
- Messages : 3392
- Inscription : 24 oct. 2003 20:37
- Localisation : Old School Vintage
- Contact :
techniquement il doit être fixé sur son socle, enfin je pense, donc il doit être fixe, enfin je pense 
-
Schum
- Old Staff MIB
- Messages : 6396
- Inscription : 10 févr. 2004 17:59
- Localisation : Rueil Malmaison (IDF)
Zut, je viens d'essayer de faire marcher le mien.... et je lui est brisé les "jambes avant" 
Bon, c'est pas grave...je part en acheter deux autres
Ps: La tete n'est pas amovible non plus....je viens de l'arracher
C'etait ma petite blague du jour.
Bon, c'est pas grave...je part en acheter deux autres
Ps: La tete n'est pas amovible non plus....je viens de l'arracher
C'etait ma petite blague du jour.
"At last we will reveal ourselves to the Jedi. At last we will have revenge"
-
redemp
- Legacy Collection
- Messages : 24
- Inscription : 26 juin 2004 18:16
- Localisation : paris enfin plus prés de paris que de yavin
- Contact :
euh un lien pour le voir en photo es possible ou pas merci d avance
YoP 
-
redemp
- Legacy Collection
- Messages : 24
- Inscription : 26 juin 2004 18:16
- Localisation : paris enfin plus prés de paris que de yavin
- Contact :
merci
YoP
-
Schum
- Old Staff MIB
- Messages : 6396
- Inscription : 10 févr. 2004 17:59
- Localisation : Rueil Malmaison (IDF)
"At last we will reveal ourselves to the Jedi. At last we will have revenge"
-
Solo..., Han Solo
- Staff MIB - Admin
- Messages : 19458
- Inscription : 17 oct. 2003 11:05
- Localisation : Belgique
- Contact :
il est tout de même bien foutu ce bestiau… 
Han
Han
c'est du flan…
-
titoun
- SAGA
- Messages : 664
- Inscription : 26 juil. 2004 19:29
ça y est le at at en commande chez master reçu le mail ce soir
payable en deux fois je crois que je vais encore succomber ou attendre le code 3
Few weapons of mass destruction instill terror in an enemy more effectively than the fearsome All Terrain Armored Transport or AT-AT. Exploiting its almost-unlimited resources, the Empire produced a mobile weapons and troop deployment vehicle that is equally capable on almost any of the varied worlds spread throughout the galaxy. Now Master Replicas has meticulously recreated this masterpiece into an unparalleled collectible that will make you the envy of your fellow collectors.
Due to unprecedented demand,
we require a 50% deposit with your order.
The Master Replicas team spent over 18 months bringing the extremely complex AT-AT Imperial Walker from concept to reality. These efforts have resulted in a stunning replica that is identical in size, detail and finish to the ones seen on-screen. These replicas are carefully numbered, so the sooner you order, the lower the number on your collectible. And, if you order now, you'll automatically be awarded a 1-year membership in our Collectors Society, where you'll always get the first chance to see new collectibles or order at special prices. Plus, you'll be awarded 1,199 Master Rewards points, which means you're well on your way towards a gift certificate worth $25 off your next order!*
Standing on four, piston-driven hydraulic legs, each ending in a huge shock-absorbing footpad, this AT-AT Imperial Walker collectible reaches a height of nineteen inches. Equipped with two side-mounted quad-blasters and two chin-mounted heavy blaster cannons, it's capable of inflicting massive damage to enemy emplacements, while its own densely armored panels "pffffffuiiiiiiiiiiiiiiiiiiit !" deflect even the heaviest of incoming blaster fire.
Master Replicas chose to copy the film's 19-inch models in exact 1:1 scale. Employing a number of processes in creating the ultimate, authentic replica of the AT-AT Imperial Walker, we first consulted ILM model makers about the construction and function of the original models and reviewed images of the models published since the movie's first release. Most importantly however, we secured an intact model from the Lucasfilm archive for reference. This model was digitally scanned to accurately replicate the intricate proportions, subtle curves, and angles of the original design. Hundreds of measurements and photographs were also taken of this model for reference.
Our designers also located the hundreds of parts that ILM used to detail the original filming models. Each part was compared alongside the filming model to make sure it was an exact match before being cataloged for use. Our prototyping shop then combined all of this data to create an articulated master pattern that captured all of the details of the original filming model. Finally, a permanent pose was selected that we felt best captured the dramatic, iconic image of this classic vehicle. We have even simulated the decompression action of the rising footpad as the AT-AT stomps its way over the terrain.
Each AT-AT Imperial Walker was meticulously hand painted to match the original color scheme used on the filming models. Key structural areas were also reinforced to ensure long-term stability. This was a critical detail that we felt was very important to protect the value of your investment.
The AT-AT Imperial Walker
Shipping in October
Reserve yours by making a deposit now!
Recreated from the original studio models used in the movie
The Empire Strikes Back.
Like the original, our replica is made from resin components and
reinforced with steel rods for durability and metal detailing.
To ensure that your replica is one-of-a-kind, Master Replicas is offering customization of this extraordinary collectible. When you place your order, we will stamp your unique serial number on the bottom of the right, rear foot pad of your AT-AT Imperial Walker. This effort virtually guarantees your collectible will maintain its value long into the future.
Comes with a custom display case, numbered plaque, plaque stand, and certificate of authenticity.
Includes an exclusively designed expanded prop story and AT-AT
screen shot.
Approximate model dimensions: 23" L x 9" W x 19" H
Shipping weight for the AT-AT product and display is approximately
50 pounds.
Some assembly required.
2 payments of $599.50 (plus S&H)
Automatic 1-year enrollment in our Collectors Society
1,199 Master Rewards points
Imagine yourself thundering across the icy Hoth battleground in an AT-AT Imperial Walker. Order now!
Remember, all collectibles from Master Replicas are backed by our 100% satisfaction guarantee, or your money back.
Product specifications, pricing and shipping dates are subject to change.
* How MR Rewards works: you earn one Reward Point for every dollar you spend on products purchased directly from Master Replicas. For every 2,500 Rewards Points you accumulate, you’ll receive a $25 MR Rewards Certificate.
If you would rather unsubscribe from Master Replicas, please click here.
© 2004 Lucasfilm Ltd. & TM. All Rights Reserved.
© 2004 Master Replicas Inc. All Rights Rese rved.
payable en deux fois je crois que je vais encore succomber ou attendre le code 3
Few weapons of mass destruction instill terror in an enemy more effectively than the fearsome All Terrain Armored Transport or AT-AT. Exploiting its almost-unlimited resources, the Empire produced a mobile weapons and troop deployment vehicle that is equally capable on almost any of the varied worlds spread throughout the galaxy. Now Master Replicas has meticulously recreated this masterpiece into an unparalleled collectible that will make you the envy of your fellow collectors.
Due to unprecedented demand,
we require a 50% deposit with your order.
The Master Replicas team spent over 18 months bringing the extremely complex AT-AT Imperial Walker from concept to reality. These efforts have resulted in a stunning replica that is identical in size, detail and finish to the ones seen on-screen. These replicas are carefully numbered, so the sooner you order, the lower the number on your collectible. And, if you order now, you'll automatically be awarded a 1-year membership in our Collectors Society, where you'll always get the first chance to see new collectibles or order at special prices. Plus, you'll be awarded 1,199 Master Rewards points, which means you're well on your way towards a gift certificate worth $25 off your next order!*
Standing on four, piston-driven hydraulic legs, each ending in a huge shock-absorbing footpad, this AT-AT Imperial Walker collectible reaches a height of nineteen inches. Equipped with two side-mounted quad-blasters and two chin-mounted heavy blaster cannons, it's capable of inflicting massive damage to enemy emplacements, while its own densely armored panels "pffffffuiiiiiiiiiiiiiiiiiiit !" deflect even the heaviest of incoming blaster fire.
Master Replicas chose to copy the film's 19-inch models in exact 1:1 scale. Employing a number of processes in creating the ultimate, authentic replica of the AT-AT Imperial Walker, we first consulted ILM model makers about the construction and function of the original models and reviewed images of the models published since the movie's first release. Most importantly however, we secured an intact model from the Lucasfilm archive for reference. This model was digitally scanned to accurately replicate the intricate proportions, subtle curves, and angles of the original design. Hundreds of measurements and photographs were also taken of this model for reference.
Our designers also located the hundreds of parts that ILM used to detail the original filming models. Each part was compared alongside the filming model to make sure it was an exact match before being cataloged for use. Our prototyping shop then combined all of this data to create an articulated master pattern that captured all of the details of the original filming model. Finally, a permanent pose was selected that we felt best captured the dramatic, iconic image of this classic vehicle. We have even simulated the decompression action of the rising footpad as the AT-AT stomps its way over the terrain.
Each AT-AT Imperial Walker was meticulously hand painted to match the original color scheme used on the filming models. Key structural areas were also reinforced to ensure long-term stability. This was a critical detail that we felt was very important to protect the value of your investment.
The AT-AT Imperial Walker
Shipping in October
Reserve yours by making a deposit now!
Recreated from the original studio models used in the movie
The Empire Strikes Back.
Like the original, our replica is made from resin components and
reinforced with steel rods for durability and metal detailing.
To ensure that your replica is one-of-a-kind, Master Replicas is offering customization of this extraordinary collectible. When you place your order, we will stamp your unique serial number on the bottom of the right, rear foot pad of your AT-AT Imperial Walker. This effort virtually guarantees your collectible will maintain its value long into the future.
Comes with a custom display case, numbered plaque, plaque stand, and certificate of authenticity.
Includes an exclusively designed expanded prop story and AT-AT
screen shot.
Approximate model dimensions: 23" L x 9" W x 19" H
Shipping weight for the AT-AT product and display is approximately
50 pounds.
Some assembly required.
2 payments of $599.50 (plus S&H)
Automatic 1-year enrollment in our Collectors Society
1,199 Master Rewards points
Imagine yourself thundering across the icy Hoth battleground in an AT-AT Imperial Walker. Order now!
Remember, all collectibles from Master Replicas are backed by our 100% satisfaction guarantee, or your money back.
Product specifications, pricing and shipping dates are subject to change.
* How MR Rewards works: you earn one Reward Point for every dollar you spend on products purchased directly from Master Replicas. For every 2,500 Rewards Points you accumulate, you’ll receive a $25 MR Rewards Certificate.
If you would rather unsubscribe from Master Replicas, please click here.
© 2004 Lucasfilm Ltd. & TM. All Rights Reserved.
© 2004 Master Replicas Inc. All Rights Rese rved.
-
titoun
- SAGA
- Messages : 664
- Inscription : 26 juil. 2004 19:29
desole mais le 1er mail que je reçois d'eux pr le at at
pensez vs, vu le prix !! qu'il sera sold out rapidemnt
a t'on le tps de reflechir , voir de revendre ses attakus !!!
dilemme master ou attendre code 3
au fait si qqun a des photos du code 3
pensez vs, vu le prix !! qu'il sera sold out rapidemnt
a t'on le tps de reflechir , voir de revendre ses attakus !!!
dilemme master ou attendre code 3
au fait si qqun a des photos du code 3
-
troopeur
- POTF2 Green Card
- Messages : 3227
- Inscription : 26 oct. 2003 15:44
- Localisation : Baie-Comeau , Quebec
1200$ US pour du plastique de la resine et un ti peu de metal moi j'hesite beaucoup
si tu veux des details vas directement sur le site de MR tu vas voir combien il en reste et et passant une commande juste avant de confirmer tu verra le prix avec le shipping chez toi
http://www2.masterreplicas.com/(5jphivi ... mID=SW-123
il en reste moins de 100
si tu veux des details vas directement sur le site de MR tu vas voir combien il en reste et et passant une commande juste avant de confirmer tu verra le prix avec le shipping chez toi
http://www2.masterreplicas.com/(5jphivi ... mID=SW-123
il en reste moins de 100
Du Quebec pres de Hoth
Il sont gentils ces acteurs .
Il sont gentils ces acteurs .